Category: All FL Passenger Backrests

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest. These rear seats come standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest. These rear seats come standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest. These rear seats come standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seat has a recessed front end to allow clearance when being installed behind a Mustang solo with the built-in driver backrest.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seats extends forward to provide ample back support for the driver, and comes standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seats extends forward to provide ample back support for the driver, and comes standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.

The Mustang Passenger Backrest rear seats extends forward to provide ample back support for the driver, and comes standard with the straight driver backrest post as shown in the picture; the Mustang offset backrest post, part #75099 $25.00, can be used for those passengers who want to lean farther back. The backrest post can be adjusted for different height settings, and can be locked into place using the supplied knurled thumbscrew at the back of the seat. The tilt angle of the backrest pad can be adjusted forward and back using the thumbscrew on the back side of the upper post. The backrest upper can be folded flat for ease of mounting and dismounting. The passenger backrest should be folded flat when the cycle is ridden without a passenger.

Note: #78032 Solo Mounting Nuts are needed in order to install the passenger seats on all 1999-13 FL Touring Models. The hardware is needed to convert one-piece seats to two-piece seats.
Cannot be used with any of the HD TourPaks. Does not fit with handrail.