Mounting Suggestions for Mustang Seats
Dyna Glide/Wide Glide 1991-95, Two-Piece

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Mon-Fri, 9:00 to 5:30, Eastern time.

_________________________________________________________________________________
A. Baseplate Features

Two-piece formed steel baseplates have rubber bumper supports at contact points. Rear seat features carpet to protect the fender. Mustang solos have a single chrome tab that aligns with the fender hole.

For general information about Mustang seat construction Click Here. 		 

_________________________________________________________________________________
B. Removal of Stock Seat

1. Remove rear fender screw.
2. If applicable, remove seat strap.
3. Slide seat back and up to remove.

_________________________________________________________________________________

C. Mounting of BOTH Mustang Solo and Passenger Seat

1. Screw rear chrome triangle bracket into the proper set of holes:

Dyna Wide Glide - first set of holes closest to rear of seat.
All others -- use other set of holes.
   

2. Attach solo seat to passenger seat by aligning two chrome tabs on front edge of
passenger seat with threaded holes in rear of solo using the screws you removed
from those holes to attach the two seats.

3. Secure rear of passenger seat to fender with stock screw.

_________________________________________________________________________________

D. Mounting of Mustang Solo ONLY


1. Engage nose bracket under welded frame tab.

2. Align chrome rear tab with stock fender hole.

3. Push seat down and secure with stock fender screw.


2004-up shown

Enjoy the comfort of your new Mustang Seat.