A. One-Piece Seats
B. Two-Piece Seats
C. Two-Piece Super Touring Seats with Driver Backrest
D. Tank Bibs
E. Fender Bibs
Steel bracket mounts to rear mounting holes on the gas tank of FXR models when converting from hinged two-piece seats to a one-piece seat.
75080- FXR Nose Bracket
$4
Cobra Seat
The lean, low look. The cobra provides a clean profile while maintaining comfort through molded high-density polyurethane foam. Separate top center panels are backed with 1/2" thick, soft foam for added comfort.
75158- Cobra Seat
Front Width - 11"
Rear Width - 8"$279
A low cut seat for the driver and a squared off passenger seat make for functional two-up riding with a perfectly tailored cover.
75599- Custom Squareback™
Front Width - 13.5"
Rear Width - 8.5"$299
The Fastback offers a super clean, custom style, cut low for the rider with good back support. The seat is tapered in back but still offers a reasonable degree of passenger comfort
75445- Fastback™
Front Width - 12"
Rear Width - 7"$289
Popular pillow seat features a split foam construction on a single baseplate, which maximizes the driver's back support and keeps the passenger from sliding forward.
75305- Regal Duke, One-Piece
Front Width - 13.5"
Rear Width - 8.5"$299
The Mustang Studded Seat has all the features to make it our most popular seat. A full front bucket for the rider, trimmed with a braided edge skirt that comes down over the frame and fender for a clean, uninterrupted look. Passenger seat angles forward to support the driver's back. Two-piece foam on a single piece steel base that quickly bolts on using stock locations. Trimmed with chrome studs and conchos tied with leather. High quality vinyl seat cover has sewn-in center panels. New technology adds long distance comfort to the "old" look.
75313- Original Studded, One-Piece
Front Width - 13.5"
Rear Width - 7.5"$339
Mustang now offers their studded style seat with a no-frills, Vintage look. Same braided edge skirt but without studs or conchos.
75743- Vintage, One-Piece
Front Width - 13.5"
Rear Width - 7.5"$309
Now you can replace your stock seat with the most comfortable seat available for any Big Twin Model! Mustang's Wide Touring Seats are now available in three styles. Each style features a wide driver seat that is deeply pocketed and provides ample back support. The rear seat also extends forward over the driver's bucket to give additional back support. The passenger sits comfortably in a full bucket that is internally supported by a steel wing shaped like a small police solo. The one-piece steel baseplate mounts easily using the chrome rear bracket on the seat.
Studded Wide Super Touring Seat
The Studded Wide Seat features chrome studs all around. The front bucket has a full skirt with braided edge trim and leather tied conchos
75505- Wide Studded, One-Piece
Front Width - 16"
Rear Width - 12"$449
A super touring seat with a no-frills, Vintage look. Features a braided edge skirt but without studs or conchos.
75736- Wide Vintage, One-Piece
Front Width - 16"
Rear Width - 12"$419
Chrome Seat Bolts
Mustang offers these chrome seat bolts which replace the stock bolts that mount the front of the passenger seat in place. This system allows for quick removal of rear seats.
Application picture
of chrome seat bolts.
78027 - Chrome Seat Bolts
$8 pair
Regal Duke
The Regal Duke is only sold as a two-piece set because pieces do not work well individually, alone or matched to a stock seat or pad.
75083 - Regal Duke, Two-Piece
Front Width - 13.5"
Rear Width - 8.5"$339
The Original Studded seat has all the features to make it our most popular seat. A full front bucket for the rider, trimmed with a braided edge skirt that comes down over the frame and fender for a clean, uninterrupted look. Passenger seat angles forward to support the driver's back. Two-piece foam on a single piece steel base that quickly bolts on using stock locations. Trimmed with chrome studs and conchos tied with leather. High quality vinyl seat cover has sewn-in center panels. New technology adds long distance comfort to the "old" look.
75321- Studded Set, Two-Piece
Front Width - 13.5"
Rear Width - 7.5"$378
75515- Front Solo ONLY of 75321
$229
75518- Rear Seat ONLY of 75321
$149
Now you can replace your stock seat with the most comfortable seat available for any Big Twin Model! Mustang's Wide Touring Seats are now available in three styles sold either as a two-piece set or individually. Each style features a wide driver seat that is deeply pocketed and provides ample back support. The rear seat also extends forward over the driver's bucket to give additional back support. The passenger sits comfortably in a full bucket that is internally supported by a steel wing shaped like a small police solo.
Wide Regal
Soft pillow styling tufted with covered buttons.
75523- Wide Regal Set, Two-Piece
Front Width - 16"
Rear Width - 12"$458
75528- Front Solo ONLY of 75523
$269
75529- Rear Seat ONLY of 75523
$189
A super touring seat without the studs and conchos. Seat skirt has a braided edge trim.
75737- Wide Vintage Set, Two-Piece
Front Width - 16"
Rear Width - 12"$448
75760- Front Solo ONLY of 75737
$259
75765- Rear Seat ONLY of 75737
$189
The Studded Wide features chrome studs all around. The front bucket has a full skirt with braided edge trim and leather tied conchos.
75520- Wide Studded Set, Two-Piece
Front Width - 16"
Rear Width - 12"$478
75521- Front Solo ONLY of 75520
$279
75522- Rear Seat ONLY of 75520
$199
C. Two-Piece Super Touring Seats with Driver Backrest
Now you can replace your stock seat with the most comfortable seat available for any Big Twin Model! Each style features a wide driver seat that is deeply pocketed. The passenger sits comfortably in a full bucket that is internally supported by a steel wing shaped like a small police solo.
The driver backrest mechanism is built directly into the passenger seat--not into the solo. Solos and passenger seats with Driver Backrest are sold separately.
Click Here.
- Pivots to match your back angle.
- Pad measures 7" high by 11" wide by 1½" thick and is contoured to match your back.
- Folds completely forward for ease of getting on your motorcycle.
- Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated.
- Unlike all others, you do not remove the seat and use a wrench.
- Easily snaps into four height positions or completely out.
Soft pillow styling tufted with covered buttons.
75528- Wide Regal Solo, Two-Piece
Width - 16 "
$269
79309- Wide Rear Seat with Driver
.....................Backrest, Two-Piece
Width - 12"
$400
Handmade in New England, Mustang Tank Bibs are available plain or with studs and a concho. Contoured to hug the tank and felt-backed to protect the paint, these bibs utilize stock mounts for easy installation. The edges are finished with braid. Decorative studs are plated brass, not steel, and will never rust. Cochos are custom, heavy die cast zinc, not a thin stamping, and are hand-tied with genuine leather straps.
93131- Plain Tank Bib
$49
93132- Studded Tank Bib
$59
Handmade at the Mustang seat plant in New England, Mustang Fender Bibs are designed to work with just a solo seat. They are felt-backed to protect paint and are perfect for covering existing scratches. They utilize stock fender mounts and are contoured to fit the fender mounts.
78025- Plain Fender Bib
.....................FX, FXR, and Softail
.............................(not FLSTS)
$30
78026- Studded Fender Bib
.....................FX, FXR, and Softail
.............................(not FLSTS)
$35
No part of this web site may be reproduced or transmitted in any form by any means without Prior Written Permission from
Mustang Motorcycle Products, Inc.
Contact the Webmaster