Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

Click for printer friendly version

A.  Baseplate Features (Click on picture for a larger view)

The marine-grade fiberglass baseplate is a direct replacement for the stock seat. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat (Click on a picture for a larger view)

1. Stock seat is fastened to frame through sides of seat under passenger hold strap. Remove these two Allen bolts.

3. Slide the stock seat back to remove it from frame. Rear of stock seat slides under a shoulder bolt on fender. (Mustang seat does not use this bolt; it can stay in the fender.)

4. Remove shoulder bolt if saddlebag clearance is needed.

C.   Mounting of Mustang Seat (Click on picture for a larger view)

1. Engage nose tab under frame.

2. Insert stock rubber bushings into side of Mustang seat. (The material is pre-cut.)

3. Secure seat with the two stock Allen bolts.