Mounting Suggestions for Mustang Seats

Honda 750 Spirit 2001-03 & 2005

All information is available at www.MustangSeats.com in color with larger images.
A.  Baseplate Features


The marine-grade fiberglass baseplate is a direct replacement for the stock seat. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.
B.   Removal of Stock Seat



1. Stock seat is fastened to frame through sides of seat under passenger hold strap. Remove these two Allen bolts.

2. Remove the two rubber bushings that were under Allen bolts.

3. Slide the stock seat back to remove it from frame. Rear of stock seat slides under a shoulder bolt on fender. (Mustang seat does not use this bolt; it can stay in the fender.)
4. Remove shoulder bolt if saddlebag clearance is needed.


Continued on next page
C.   Mounting of Mustang Seat

1. Engage nose tab under frame.
2. Insert stock rubber bushings into side of Mustang seat. (The material is pre-cut.)
3. Secure seat with the two stock Allen bolts.


If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.