Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@mustangseats.com or
800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

A.  Baseplate Features (Click picture to enlarge)

The one-piece, marine-grade fiberglass baseplate directly replaces the stock one-piece and two-piece seats. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

B1.   Removal of Stock One-Piece Seat (Click picture to enlarge)

1. Remove rear fender screw or acorn nut and the mounting bolt on each side of driver's section, if applicable.
2. Slide seat back and up to remove.

B2.   Removal of Stock Two-Piece Seat (Click picture to enlarge)

1. Remove the side mounting bolts, on each side of the solo seat.
2. Remove rear fender screw.
3. Slide seat back and up to remove.

C.   Mounting of Mustang Seat

Hardware included: One nylon washer

1. Engage nose tab into receiver at base of gas tank.
2. Slide seat forward to align chrome rear bracket with fender mount.
3. Secure with stock screw or acorn nut.

Note: Side mounting bolts are not used with one-piece seat.