Mounting Suggestions for Mustang Seats
Honda VT1100 Sabre 2000-03, Spirit 1997-03, Shadow 1987-97 & ACE 1995-01, One-Piece

All information is available at www.MustangSeats.com in color with larger images.
A.  Baseplate Features

The one-piece, marine-grade fiberglass baseplate directly replaces the stock one-piece and two-piece seats. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

B1.   Removal of Stock One-Piece Seat
1. Remove rear fender screw or acorn nut and the mounting bolt on each side of driver's section, if applicable.
2. Slide seat back and up to remove.
B2.   Removal of Stock Two-Piece Seat
 1. Remove the side mounting bolts, on each side of the solo seat.
2. Remove rear fender screw.
3. Slide seat back and up to remove.

C.   Mounting of Mustang Seat

Hardware included: One nylon washer

1. Engage nose tab into receiver at base of gas tank.
2. Slide seat forward to align chrome rear bracket with fender mount.
3. Secure with stock screw or acorn nut.

Note: Side mounting bolts are not used with one-piece seat.
 
If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.