Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

A.  Baseplate Features (Click picture to enlarge)

The two-piece, marine-grade fiberglass baseplate directly replaces the stock two-piece seat. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat

1. Unlock solo with the ignition key.

2. Pull nose of solo and slide forward to remove.

3. Remove two 5mm Allen bolts in the front of passenger seat and one 8mm Allen bolt at the rear of passenger seat.

4. Remove passenger seat.

Note: When passenger seat is removed, fender will have no brackets.

C.   Mounting of Mustang Seat (Click picture to enlarge)

1. Passenger seat is mounted first. Secure with one stock 8mm bolt in rear and two stock 5mm bolts in front.
2. Solo is mounted by engaging rear tab into fender mount and locking front latch.

Note: If solo seat does not line up with the front latch, the rear tab is not properly engaged. The skirt on the solo seat must not be bent under seat.