Mounting Suggestions for Mustang Fender Bibs
Honda VTX 1300 Retro & 1800 Retro
Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.   Click for
printer friendly
version


1. Remove seat.
2. Remove rear seat mounting bracket from fender.
3. Attach rear of fender bib with stock 6mm screw.
4. Front of bib attaches to fender using supplied Velcro® tape.
5. Install solo. (Velcro® piece remaining on fender is hidden under solo when bib is removed.)

NOTE: Mustang recommends removal of fender bib before reinstalling rear seat. Mounting a rear seat over a fender bib may result in damage to the bib, poor seat alignment or other problems.
Plain
Studded
Enjoy the custom look of your Mustang Fender Bib.

All text and graphics are COPYRIGHT © AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company, Inc.

Contact the Webmaster