Mounting Suggestions for Mustang Tank Bibs
Honda 1300C & Retro

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

Click for printer friendly version

Plain

Studded

1. Remove the gas cap and three lower dash screws with a 5mm Allen wrench.

2. Remove seat to expose rear tank mounting bolt. Remove the 8mm bolt and washer.

3. Lift dash and place the tank bib around and under the three protruding dash mounts as well as the gas cap hole.

4. Lower dash back into place then reinstall the three lower dash screws and gas cap.

 

5. Install the 8mm tank mounting bolt through the bib then into the frame and tighten, making sure the large washer is on top of the bib.

6. Reinstall the seat.

Enjoy the custom look of your Mustang Tank Bib.

All text and graphics are COPYRIGHT © AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company, Inc.

Contact the Webmaster