All
information is available at www.MustangSeats.com in color
with larger images.
|
1. Remove the gas cap and
three lower dash screws with a 5mm Allen wrench.
2. Remove seat to expose rear tank mounting bolt. Remove the 8mm bolt
with a 12mm wrench.
|
|
3. Lift dash and place the
tank bib around and under the three protruding dash mounts as well
as the gas cap hole.
4. Lower dash back into
place then reinstall the three mounting screws and gas cap.
|
|
5.
Install the 8mm tank mounting bolt through our bib then into the
frame and tighten.
NOTE: Make sure the large washer is on top of the panel.
6. Reinstall the seat.
|
|
|
|
| If you have
any questions, contact one of our seat experts at questions@MustangSeats.com
or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to
5:30, Eastern time. Enjoy
the custom look of your new Mustang Tank Bib. |
|
