Mounting Suggestions for Mustang Seats
Honda VTX 1300 C
All information is available at www.MustangSeats.com in color with larger images.
A. Baseplate Features

The two-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are positioned to protect the frame and fender.
B. Removal of Stock Seat

1. Remove the Allen bolt on each side of solo with a 6mm Allen wrench.
2. Remove the acorn nut at the rear of the seat with a 10mm wrench.
3. Lift seat up and back to remove. (Front and rear seat are bolted together.)

C. Mounting of Mustang Seat

Hardware included: One chrome spool washer, One 1" x 6mm bolt, Two nylon washers

1. Install one nylon washer under chrome spool
washer then secure to fender with 1" x 6mm bolt.

2. Mustang solo mounts just like stock: Slide nose bracket into frame under gas tank.
3. Secure to frame using stock Allen bolts through side brackets.


 

4. Slide the passenger seat into spool washer under solo.


5. Use one nylon washer between rear chrome bracket and fender.
6. Secure using stock 6mm acorn nut.


If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.