Mounting Suggestions for Mustang Seats

Kawasaki Vulcan 1500 Classic 1996-up (Carbureted Only), One-Piece

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.      Click for
printer friendly
version

A.  Baseplate Features (Click on picture for a larger view)


The one-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are strategically located to protect the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat

1. Remove the bolt on each side of the solo.
2. Slide nose of solo forward and up to remove.
3. Remove 6mm bolt at front of passenger seat.
4. Slide pad forward to release from fender brackets.

C.   Mounting of Mustang Seat

Note: Mustang seat will only mount properly when using the
fender bracket farthest to the rear.


1. Slide seat back into rear fender bracket.
2. Push forward to engage nose of seat.
3. Secure using stock side bolts.
Enjoy the comfort of your new Mustang seat.

All text and graphics are COPYRIGHT © 2002 AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.

Contact the Webmaster

Revised 9/02