Mounting Suggestions for Mustang Seats
Kawasaki Vulcan 1500 Classic 1996-up (Carbureted Only), One-Piece

All Information is available at www.MustangSeats.com in color with larger images.

A.  Baseplate Features

The one-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are strategically located to protect the frame and fender.

B.   Removal of Stock Seat

1. Remove the bolt on each side of the solo.
2. Slide nose of solo forward and up to remove.
3. Remove 6mm bolt at front of passenger seat.
4. Slide pad forward to release from fender brackets.

C.   Mounting of Mustang Seat


Note: Mustang seat will only mount properly
when using the fender bracket farthest to the rear.

1. Slide seat back into rear fender bracket.
2. Push forward to engage nose of seat.
3. Secure using stock side bolts.



If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.