Mounting Suggestions for Mustang Seats

Kawasaki Vulcan 800 1995-up
and 800 Classic 1996-up, One-Piece

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.      Click for
printer friendly
version

A.  Baseplate Features (Click on picture for a larger view)

The one-piece, marine-grade fiberglass baseplate is a direct replacement for the stock one-piece seat. Rubber bumpers are strategically placed to protect the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat (Click on picture for a larger view)

1. Remove rear 6mm bolt.
2. Slide seat back and up to remove. The seat may be tight and some force is necessary.
3. Remove center bracket from fender and reinstall the two bolts.

C.   Mounting of Mustang Seat

Hardware included: One nylon washer

1. Engage nose tab.
2. Place nylon washer (supplied) between rear chrome tab and fender.
3. Secure with stock 6mm bolt.

Enjoy the comfort of your new Mustang seat.

All text and graphics are COPYRIGHT © 2002 AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.

Contact the Webmaster

Revised 9/02