| Please
review the information below. If you have any questions or need further
technical assistance, you are welcome to contact one of our Mustang
seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern
time. |
|
 |
Click
for
printer friendly
version |
|
A.
Baseplate Features
(Click
on picture for a larger view)
|
The two-piece, marine-grade
fiberglass baseplate is a direct replacement for the stock one-piece
seat.
Rubber bumpers are strategically placed to protect the frame and fender.
For general information about
Mustang seat
construction Click
Here.
|
|
B.
Removal
of Stock Seat
(Click
on picture for a larger view)
|
1. Remove rear 6mm bolt.
2. Slide seat back and up to remove. The seat may be tight and some
force is necessary.
3. Remove center bracket from fender.
|
|
|
|
|
C.
Mounting of Mustang Seat
(Click
on picture for a larger view)
|
Hardware included:
Two chrome spool washers
Two 1" bolts
Three nylon washers
|
|
1. Engage nose tab of solo.
2. Place one nylon washer between each chrome solo bracket and fender.
3. Align spool washers on top of the solo brackets and bolt down to
the fender with the supplied bolts.
4. The front of the passenger seat has two slotted brackets that engage
into the spool washers.
(See "Baseplate Features" picture.)
5. Nylon washer goes between the rear chrome tab and fender.
6. Secure with stock 6mm bolt.
|
|
|
|
|
|
Enjoy the
comfort of your new Mustang seats.
|
|
All
text and graphics are COPYRIGHT © 2002 AL SIMMONS COMPANY, INC. ALL RIGHTS
RESERVED
No part of this web site may be reproduced, or transmitted in any form by
any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.
Contact the Webmaster
