Mounting Suggestions of Mustang Seats - Kawasaki Vulcan 1500 Classic 1996-03 and Nomad 1999-03, Two-Piece

Mounting Suggestions of Mustang Seats

Kawasaki Vulcan 1500 Classic 1996-03 and Nomad 1999-03, Two-Piece

All information is available at www.MustangSeats.com in color with larger images.

1. Remove the stock side bolt on each side of the solo.

2. Slide nose of solo forward and up to remove.

3. Remove bolt at front of passenger pad.

4. Slide pad forward to remove.

5. On Nomad and Fuel Injected models: Remove seat bracket.

C. Mounting of Mustang Seat

Hardware included:
One rear fender bracket (Nomad and Classic Fuel Injected seats only)
One nylon washer

1. Nomad and Fuel Injected only: Install supplied fender bracket in rear set of holes using stock bolts.
2. Slide passenger pad back to engage into bracket.
3. Use stock bolt and nylon washer to secure front of pad.
4. Place rear of solo onto frame.
5. Push solo back against the passenger seat, compressing the foam until the nose bracket of solo slides under the large washer at the base of the gas tank.
6. Align two side brackets with frame and secure with stock bolts.

If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.

All information is available at www.MustangSeats.com in color with larger images.
A. Baseplate Features
The two-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are positioned to protect the frame and fender.

B. Removal of Stock Seat
1. Remove the stock side bolt on each side of the solo. 2. Slide nose of solo forward and up to remove. 3. Remove bolt at front of passenger pad. 4. Slide pad forward to remove. 5. On Nomad and Fuel Injected models: Remove seat bracket.
Continued on next page
C. Mounting of Mustang Seat
Hardware included: One rear fender bracket (Nomad and Classic Fuel Injected seats only) One nylon washer 1. Nomad and Fuel Injected only: Install supplied fender bracket in rear set of holes using stock bolts. 2. Slide passenger pad back to engage into bracket. 3. Use stock bolt and nylon washer to secure front of pad. 4. Place rear of solo onto frame. 5. Push solo back against the passenger seat, compressing the foam until the nose bracket of solo slides under the large washer at the base of the gas tank. 6. Align two side brackets with frame and secure with stock bolts.

If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.