Mounting Suggestions for Mustang Fender Bibs Kawasaki Vulcan 2000

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.   Click for
printer friendly
version

 
 1. Remove rear seat and all it's mounting hardware.
(Brackets are removed using a 10mm socket.)

 

 2. Remove front seat using an 8mm socket.
It's a good idea to reinstall the two center bracket bolts back into the fender to plug the holes.

3. Lay bib on fender. Place solo over bib's front mounting holes then fasten to fender.
4. Align bib's rear mounting holes with fender holes then fasten with supplied chrome 6mm Allen bolts and chrome washers.

Enjoy the customized look of your Mustang Fender Bib.

All text and graphics are COPYRIGHT © 2003 AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.

Contact the Webmaster