Suzuki VL1500 Intruder LC 1998-2004

A. Two-Piece Wide Touring Seats
B. Two-Piece Wide Touring Seats w/ Driver Backrest
C. Sissy Bar Pads
D. Fender Bibs

A. Two-Piece Wide Touring Seats

Mustang’s popular touring seat for the 1998-2004 Suzuki VL 1500 Intruder LC features several design improvements over the stock seat.

The 17.5" wide, deeply pocketed driver bucket sits you at the ideal cruising angle. The driver’s back is well supported by the nose of the passenger seat that extends forward to create a full 8.5" high backrest. The entire 13" width of the comfortable passenger seat is fully supported by Mustang’s unique internal steel wings--no sagging on the edges, no more passenger complaints.

Built on a marine-grade fiberglass baseplate, the two-piece seat easily mounts just like stock. Mustang’s touring seat is available with or without the built-in, removable driver backrest and is sold in three styles: vintage, with studs and conchos or with studs, conchos and fringe.

Studded Wide Touring Seat
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.

Enlarge Studded Seat

75950 - Studded Wide Touring Seat

Front Width - 17.5"
Rear Width - 13"

$499

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat
The same specifications of the Wide Studded style with the braided edge skirt but without studs or conchos.
Enlarge Vintage Seat

75952 - Vintage Wide Touring Seat

Front Width - 17.5"
Rear Width - 13"

$469

Enlarge Vintage Seat on Bike
Mounting Suggestions

B. Two-Piece Wide Touring Seats w/ Driver Backrest

These seats are sold as a complete three-piece set including solo, removable driver backrest and matching passenger seat. Sissy bar pad sold separately.

Check Out the Features of the Mustang Driver Backrest
  • Pivots to match your back angle.
  • Pad measures 7" high by 12" wide by 1.5" thick and is contoured to match your back.
  • Folds completely forward for ease of getting on your motorcycle.
  • Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated.
  • Unlike all others, you do not remove the seat or use a wrench.
  • Easily snaps into four height positions or completely out.

    To Check Out All the Features of Mustang's Driver Backrest Click Here.

Also available:
Offset Driver Backrest Post that leans you back 2" further.
With all the features of our standard driver backrest.
Click Here

Studded Wide Touring Seat with Driver Backrest
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs and leather tied conchos.

Enlarge Studded Seat

79200 - Studded Wide Touring
......................Seat w/ Driver Backrest

Front Width - 17.5"
Rear Width - 13"

$719

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat w/Driver Backrest
The same specifications of the Wide Studded style with the braided edge skirt but no studs or conchos.
Enlarge Vintage Seat

79201 - Vintage Wide Touring
......................Seat w/ Driver Backrest

Front Width - 17.5"
Rear Width - 13"

$689

Enlarge Vintage Seat on Bike
Mounting Suggestions

C. Sissy Bar Pads

For a complete selection of Sissy Bar Pads and Contoured Sissy Bar Pads Click Here.


D. Mustang Fender Bib

Handmade at the Mustang seat plant in New England, Mustang Fender Bibs are designed to work with just a solo seat. They are felt-backed to protect paint and are perfect for covering existing scratches. They utilize stock fender mounts and are contoured to fit the fender mounts.

Enlarge Plain Fender Bib
...........#78092 Plain Bib............. #78093 Studded Bib

78092 - Plain Fender Bib

$30

78093 - Studded Fender Bib

$35

Enlarge Studded Fender Bib
Mounting Suggestions
COPYRIGHT© 2008 MUSTANG MOTORCYCLE PRODUCTS, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced or transmitted in any form by any means without Prior Written Permission from
Mustang Motorcycle Products, Inc.


Contact the Webmaster