Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

A. Baseplate Features (Click picture to enlarge)

 

The two-piece, marine-grade fiberglass baseplate directly replaces the stock two-piece seat. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B. Removal of Stock Seat

1. Remove four stock screws, two on each side of solo.
2. Lift solo up and forward to remove.
3. Remove two screws at front of passenger seat and one rear fender screw.
4. Lift passenger seat up to remove.
5. Remove bracket from front of passenger seat.

C. Mounting of Mustang Seat

1. Install stock bracket onto front of passenger seat with supplied 1/4-20x1-1/4" hex bolts.
2. Secure passenger seat with stock screws: one in the rear and two in the front.
3. Place solo on frame and align the four brackets with frame holes.
4. Secure with four stock screws.