| Please
review the information below. If you have any questions or need further
technical assistance, you are welcome to contact one of our Mustang
seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern
time. |
|
 |
Click
for
printer friendly
version |
|
A.
Baseplate Features
(Click
on a picture for a larger view)
|
The one-piece, marine-grade,
fiberglass baseplate directly replaces the stock two-piece seat. Rubber
bumpers are positioned to prevent the seat from touching the frame and
fender.
For general information about
Mustang seat construction Click
Here.
|
|
B.
Removal
of Stock Seat
(Click
on a picture for a larger view)
|
1. Unlatch
solo with key.
2. Slide solo back and up to remove.
3. Remove one 8mm screw at back of passenger seat and two 6mm screws
at front of seat.
4. Lift up to remove passenger seat.
|
 |
| |
|
C.
Mounting of Mustang Seat
(Click
on a picture for a larger view)
|
Hardware Included: one thumb
screw and one nylon washer
1.Engage tab into receiver
at base of gas tank.
2. Use supplied nylon washer between rear bracket and fender.
3. Secure to fender using supplied thumb screw or original 8mm screw.
Note: The key latch mechanism is not used with the one-piece seat
|
| |
| |
| Enjoy
the comfort of your new Mustang seat. |
|
All
text and graphics are COPYRIGHT © 2003 AL SIMMONS COMPANY, INC. ALL RIGHTS
RESERVED
No part of this web site may be reproduced, or transmitted in any form by
any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.
Contact the Webmaster
