Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

A.  Baseplate Features (Click picture to enlarge)

The two-piece, marine-grade fiberglass baseplate directly replaces the stock two-piece seat. Rubber bumpers are positioned to prevent the seat from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat (Click picture to enlarge)

1. Unlatch solo with key.
2. Slide solo back and up to remove.
3. Remove one 8mm screw at back of passenger pad and two 6mm screws at front of pad.
4. Lift up to remove passenger pad.

C.   Mounting of Mustang Seat

1. Secure passenger pad to fender with one 8mm and two 6mm stock screws.
2. Engage nose tab on solo into receiver at base of gas tank and align pin with latch mechanism.
3. Push down on solo to secure in latch mechanism.