Mounting Suggestions for Mustang Seats

Suzuki Volusia 800 2001-up

Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.      Click for
printer friendly
version

A.  Baseplate Features (Click on picture for a larger view)


The two-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are positioned to protect the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat (Click on picture for a larger view)

1. Remove rear 8mm Allen screw.
2. Slide passenger seat back to remove.
3. Remove rear seat mounting bracket with handstrap.
4. Slide solo back and up to remove.

C.   Mounting of Mustang Seat (Click on a picture for a larger view)


Hardware included:
One special triangle bracket with a 1/4"-20 stud
One grooved nut

1. Install the special triangle bracket to the fender with stock bolts.
  

2. Engage front of solo into frame below tank. Attach rear of solo to the special triangle bracket and secure with the slotted nut.

Note: Do not over tighten slotted nut.

3. Slide the slotted bracket on the front of the passenger seat into the slotted nut.

  

4. Secure seat in rear using stock 8mm Allen screw.

Enjoy the comfort of your new Mustang seat.

All text and graphics are COPYRIGHT © 2002 AL SIMMONS COMPANY, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced, or transmitted in any form by any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.

Contact the Webmaster