Mounting Suggestions for Mustang Seats
Suzuki Volusia 800 2001-up

All information is available at www.MustangSeats.com in color with larger images.

A.  Baseplate Features

The two-piece, marine-grade fiberglass baseplate is a direct replacement for the stock two-piece seat. Rubber bumpers are positioned to protect the frame and fender.

B.   Removal of Stock Seat
1. Remove rear 8mm Allen screw.
2. Slide passenger seat back to remove.
3. Remove rear seat mounting bracket with handstrap.
4. Slide solo back and up to remove.


 

 

 

 

Continued on next page

 

 

 

 

 

 

C.   Mounting of Mustang Seat

Hardware included:
One special triangle bracket with a 1/4"-20 stud.
One grooved 1/4 - 20 nut.

1. Install the special triangle bracket to
the fender with stock bolts.

 2. Engage front of solo into frame below tank. Attach rear of solo to the special triangle bracket and secure with the slotted nut.

Note: Do not over tighten grooved nut.


3. Slide the slotted bracket on the front
of the passenger seat into the grooved nut.


4. Secure seat in rear using stock 8mm Allen screw.



 
If you have any questions, contact one of our seat experts at questions@MustangSeats.com or 800-243-1392 or 860-582-9633 Monday-Friday, 9:00 to 5:30, Eastern time. Enjoy the comfort of your new Mustang seat.