Suzuki Volusia 800 2001-2004
& Boulevard C50 & T 2005-08

A. Two-Piece Wide Touring Seats
B. Two-Piece Wide Touring Seats w/ Driver Backrest
C. Sissy Bar Pads
D. Tank & Fender Bibs

A. Two-Piece Wide Touring Seats

Mustang's popular touring seat for the Volusia features several design improvements over the stock seat. The 16" wide deeply pocketed driver bucket sits you at the ideal cruising angle. The driver's back is well supported by the nose of the passenger seat that extends forward to create a full 6.5" high backrest.

The entire 12" width of the comfortable passenger seat is fully supported by Mustang's unique internal steel support wings--no sagging on the edges, no more passenger complaints

Studded Wide Touring Seat
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.

Enlarge Studded Seat 75810 - Studded Wide Touring Seat

Front Width - 16 "
Rear Width - 12"

$489

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat
The same specifications of the Wide Studded style with the braided edge skirt but without studs or conchos.
Enlarge Vintage Seat

75811 - Vintage Wide Touring Seat

Front Width - 16 "
Rear Width - 12"

$459

Enlarge Vintage Seat on Bike
Mounting Suggestions

B. Two-Piece Wide Touring Seats w/ Driver Backrest

Sold as a complete three-piece set including solo, removable driver backrest and matching passenger seat. Same specifications as described above. The built-in driver backrest offers more features than any other backrest available on the market.

Check Out the Features of the Mustang Driver Backrest
  • Pivots to match your back angle.
  • Pad measures 7" high by 12" wide by 1.5" thick and is contoured to match your back.
  • Folds completely forward for ease of getting on your motorcycle.
  • Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated.
  • Unlike all others, you do not remove the seat or use a wrench.
  • Easily snaps into four height positions or completely out.

    To Check Out All the Features of Mustang's Driver Backrest Click Here.

Also available:
Offset Driver Backrest Post that leans you back 2" further.
With all the features of our standard driver backrest.
Click Here

Studded Wide Touring Seat with Driver Backrest
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs and leather tied conchos.

Enlarge Studded Seat 79282 - Studded Wide Touring
......................Seat w/ Driver Backrest

Front Width - 16"
Rear Width - 12"

$699

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat w/Driver Backrest
The same specifications of the Wide Studded style with the braided edge skirt but no studs or conchos.
Enlarge Vintage Seat

79283 - Vintage Wide Touring
......................Seat w/ Driver Backrest

Front Width - 16 "
Rear Width - 12"

$669

Enlarge Vintage Seat on Bike
Mounting Suggestions

C. Sissy Bar Pads

For a complete selection of Sissy Bar Pads and Contoured Sissy Bar Pads Click Here.


.

D. Tank & Fender Bib

Handmade in New England, Mustang Tank Bibs are available plain or with studs and a concho. Contoured to hug the tank and felt-backed to protect the paint, these bibs utilize stock mounts for easy installation. The edges are finished with braid. Decorative studs are plated brass, not steel, and will never rust. Conchos are custom, heavy die cast zinc, not a thin stamping, and are hand-tied with genuine leather straps.

Handmade at the Mustang seat plant in New England, Mustang Fender Bibs are designed to work with just a solo seat. They are felt-backed to protect paint and are perfect for covering existing scratches. They utilize stock fender mounts and are contoured to fit the fender mounts.

Enlarge Plain Tank Bib

................................
#93171 Plain .....................#93172 Studded


#78048 Plain ...................................#78049 Studded

93171 - Plain Tank Bib

$49

93172 - Studded Tank Bib

$59

 

 

78048 - Plain Fender Bib

$30

78049 - Studded Fender Bib

$35

Enlarge Studded Tank Bib
Mounting Suggestions
Enlarge Plain Fender Bib
Enlarge Plain Bib on Bike
Enlarge Studded Fender Bib
Enlarge Studded Bib on Bike
Mounting Suggestions
COPYRIGHT© 2008 MUSTANG MOTORCYCLE PRODUCTS, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced or transmitted in any form by any means without Prior Written Permission from
Mustang Motorcycle Products, Inc.


Contact the Webmaster