Please review the information below. If you have any questions or need further technical assistance, you are welcome to contact one of our Mustang seat experts by clicking here or call 800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern time.

A.  Baseplate Features (Click picture to enlarge)

The two-piece, marine-grade fiberglass baseplate is a direct replacement for the stock seat and features rubber bumpers to prevent it from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat (Click picture to enlarge)

1. Unlatch solo with key.
2. Slide solo forward and up to remove.

3. Remove two bolts at front of passenger seat.
4. Slide passenger seat forward and up to remove.
5. Remove hand strap and four rubber pads from fender.
Note: (1/8" thick pads are lightly glued to fender)

C.   Mounting of Mustang Seat (Click picture to enlarge)

Hardware included: Two fender washers and u-shaped fender bracket.
1. Engage metal bracket on passenger seat into fender bracket.

2. Align rubber splash shield, supplied washers, u-shaped solo bracket and mounting brackets on passenger seat with fender holes.
3. Secure with two stock bolts.

4. Engage rear of solo under u-shaped solo bracket, push nose of solo down to engage latch mechanism.