A.  Baseplate Features (Click picture to enlarge)

The two-piece, marine-grade fiberglass baseplate directly replaces the stock two-piece seat and features rubber bumpers to prevent it from touching the frame and fender.

For general information about Mustang seat construction Click Here.

B.   Removal of Stock Seat

1. Unlatch solo with key.
2. Lift solo up and slide back to remove.
3. Remove two 4mm Allen bolts at front of passenger seat; remove helmet lock bracket and fold rubber flap down.
4. Reach under fender and remove the three 4mm Allen bolts holding passenger seat to fender.

C.   Mounting of Mustang Seat (Click picture to enlarge)

Hardware included: Plastic fender bracket with three 1/4 x 20 mounting screws and nuts.

1. Install fender bracket with three supplied mounting screws. 2. Engage metal bracket on passenger seat into fender bracket.

3. Slide passenger seat back until front brackets line up with holes in fender.
4. Align rubber flap, helmet lock bracket and brackets on passenger seat; secure to fender with stock 4mm Allen bolts.
5. Slide nose bracket on solo into receiver at base of gas tank, push rear of solo down to engage latch mechanism.