Yamaha V-Star 1300
& 1300 Tourer 2007-08

A. One-Piece Seats
B. Two-Piece Wide Touring Seats
C. Two-Piece Wide Touring Seats w/Driver Backrest
D. Contoured Sissy Bar Pads
E. Tank & Fender Bibs

The content of this page is constantly being updated. Certain closeup and application photos are pending and will be updated as we produce them.

A. One-Piece Wide Seats

DayTripper™
Mustang's advanced comfort technology has been incorporated into this totally new style of custom seat. Ride low, look cool and still be comfortable at the end of the day's ride. The detailed stitch work in the highly durable, synthetic glove-leather cover makes the DayTripper ™ a real show winner. Never before has such a low and lean seat been available that feels this good for both the rider and the passenger.
Seat Dimensions: 12" Front Width; 8 " Rear Width

Enlarge DayTripper™ Seat

76561 - DayTripper™

$349

Enlarge DayTripper™ on Bike

B. Two-Piece Wide Touring Seats

Mustang’s popular touring seat for the V-Star 1300 & 1300 Tourer offers several design improvements over the stock seat. The driver's seat is 17" wide and sits you at the ideal cruising angle. The entire 12" width of the comfortable passenger seat is fully supported by Mustang's unique internal steel support wings.

Additional driver back support is provided by the passenger seat that extends forward. The rear seat is wide and utilizes internal steel support wings for all day comfort--your passenger will be happy. Mustang's engineers have designed the V Star seat to close tolerances for a perfectly tight fit, yet it is removed with a simple twist of the stock key latch.
.

Studded Wide Touring Seat
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.
Seat Dimensions: 17" Front Width; 12" Rear Width
Enlarge Studded Seat

76562 - Studded Wide Touring Seat

$479

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat
The same specifications as the Wide Studded style with the braided edge skirt but no studs or conchos.
Seat Dimensions: 17" Front Width; 12" Rear Width
Enlarge Vintage Seat

76563 - Vintage Wide Touring Seat

$449

 

C. Two-Piece Wide Touring Seats w/Driver Backrest

These seats are sold as a complete three-piece set including solo, removable driver backrest, and matching passenger seat. Sissy bar pad sold separately.

Check Out the Features of the Mustang Driver Backrest
  • Pivots to match your back angle.
  • Pad measures 7" high by 12" wide by 1.5" thick and is contoured to match your back.
  • Folds completely forward for ease of getting on your motorcycle.
  • Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated.
  • Unlike all others, you do not remove the seat or use a wrench.

  • Easily snaps into four height positions or completely out.

    To Check Out All the Features of Mustang's Driver Backrest Click Here.

Also available:
Offset Driver Backrest Post that leans you back 2" further.
With all the features of our standard driver backrest. Click Here
Studded Wide Touring Seat w/Driver Backrest
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.
Seat Dimensions: 17" Front Width; 12" Rear Width

79476 - Studded Wide Touring Seat
......................w/Driver Backrest

$699
Vintage Wide Touring Seat w/Driver Backrest
The same specifications as the Wide Studded style with the braided edge skirt but no studs or conchos.
Seat Dimensions: 17" Front Width; 12" Rear Width

79477 - Vintage Wide Touring Seat
......................w/Driver Backrest

$669

D. Contoured Sissy Bar Pads

For a complete selection of Sissy Bar Pads and Contoured Sissy Bar Pads Click Here.

E. Tank & Fender Bibs

Tank Bibs
Handmade in New England, Mustang Tank Bibs are available plain or with studs and a concho. Contoured to hug the tank and felt-backed to protect the paint, these bibs utilize stock mounts for easy installation. The edges are finished with braid. Decorative studs are plated brass, not steel, and will never rust. Conchos are custom, heavy die cast zinc, not a thin stamping, and are hand-tied with genuine leather straps.

93203 - Plain Tank Bib

$49

93204 - Studded Tank Bib (Shown)

$59
Fender Bibs
Handmade at the Mustang seat plant in New England, Mustang Fender Bibs are designed to work with just a solo seat. They are felt-backed to protect paint and are perfect for covering existing scratches. They utilize stock fender mounts and are contoured to fit the fender mounts.

78125 - Plain Fender Bib

$30

78126 - Studded Fender Bib (Shown)

$35
COPYRIGHT© 2008 MUSTANG MOTORCYCLE PRODUCTS, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced or transmitted in any form by any means without Prior Written Permission from
Mustang Motorcycle Products, Inc.

Contact the Webmaster