Please review the
information below. If you have any questions or need further technical
assistance, you are welcome to contact one of our Mustang seat experts
at questions@MustangSeats.com
or
800-243-1392 or 860-582-9633 Monday - Friday, 9:00 to 5:30, Eastern
time.
|
Click for printer friendly version |
A.
Baseplate Features
(Click
picture to enlarge)
|
The two-piece, marine-grade
fiberglass baseplate directly replaces the stock two-piece seat. Rubber
bumpers are positioned to prevent the seat from touching the frame and
fender.
For general information about
Mustang seat construction Click
Here.
|
|
B.
Removal
of Stock Seat
|
1. Unlock
solo with key.
2. Pull rear of solo up and slide back to remove.
3. Remove rear fender screw and slide passenger seat forward to remove.
|
|
C.
Mounting of Mustang Seat
|
Note: When replacing
the Yamaha accessory one-piece seat, a fender mounting bracket
must be purchased from Mustang (#78047) or from your Yamaha dealer
(#4NK-2475H-00).
1.
Passenger seat is mounted first. Slide rear seat back to engage
brackets on front of rear seat into fender bracket.
2. Secure rear tab to fender with stock screw.
3. Solo is mounted by engaging nose tab into receiver at base
of gas tank and then pressing down rear of seat with locking
latch.
|
 |
|
| |
| |
| Enjoy
the comfort of your new Mustang seat. |
|
All
text and graphics are COPYRIGHT © 2003 AL SIMMONS COMPANY, INC. ALL RIGHTS
RESERVED
No part of this web site may be reproduced, or transmitted in any form by
any means without PRIOR WRITTEN PERMISSION of Al Simmons Company.
Contact the Webmaster
