Yamaha Royal Star Tour Deluxe 1300 2005-08
(Except Venture Models)

A. Two-Piece Wide Touring Seats
B. Two-Piece Wide Touring Seats w/Driver Backrest
C. Contoured Sissy Bar Pads
D. Tank & Fender Bibs

A. Two-Piece Wide Touring Seats

Carefully designed to provide the riding posture for unparalleled long-distance comfort. The deeply pocketed front bucket is a full 17" across. The front bucket is engineered to comfortably angle the driver back into the seat to eliminate that "pushed-forward" feeling while keeping his spine straight. The result of this ideal cruising angle is no more aches and pains. Mustang Royal Star seats measure no higher than the stock seat, which tends to collapse to a lower, uncomfortable seating position.

Additional driver back support is provided by the passenger seat that extends forward. The rear seat is 14" wide and utilizes internal steel support wings for all day comfort--your passenger will be happy. Mustang's engineers have designed the Royal Star seat to close tolerances for a perfectly tight fit, yet it is removed with a simple twist of the stock key latch.
.

Studded Wide Touring Seat
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.
Seat Dimensions: 17 " Front Width; 14 " Rear Width
Enlarge Studded Seat

76550 - Studded Wide Touring Seat

$499

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat
The same specifications as the Wide Studded style with the braided edge skirt but no studs or conchos.
Seat Dimensions: 17 " Front Width; 14 " Rear Width
Enlarge Vintage Seat

76551 - Vintage Wide Touring Seat

$469

Enlarge Vintage Seat on Bike
Mounting Suggestions

B. Two-Piece Wide Touring Seats w/Driver Backrest

Sold as a complete two-piece set that includes seat and removable driver backrest.

Check Out the Features of the Mustang Driver Backrest
  • Pivots to match your back angle.
  • Pad measures 7" high by 12" wide by 1.5" thick and is contoured to match your back.
  • Folds completely forward for ease of getting on your motorcycle.
  • Rounded thumb screw adjusts backrest forward and back up to 2" while you are seated.
  • Unlike all others, you do not remove the seat or use a wrench.
  • Easily snaps into four height positions or completely out.

    To Check Out All the Features of Mustang's Driver Backrest Click Here.

Also available:
Offset Driver Backrest Post that leans you back 2" further.
With all the features of our standard driver backrest.
Click Here

Studded Wide Touring Seat w/Driver Backrest
The perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim, chrome studs, and leather tied conchos.
Seat Dimensions: 17 " Front Width; 14 " Rear Width
Enlarge Studded Seat

79420 - Studded Wide Touring Seat
......................w/Driver Backrest

$719

Enlarge Studded Seat on Bike
Mounting Suggestions
Vintage Wide Touring Seat w/Driver Backrest
The same specifications as the Wide Studded style with the braided edge skirt but no studs or conchos.
Seat Dimensions: Front Width - 17" Rear Width - 14"
Enlarge Vintage Seat

79421 - Vintage Wide Touring Seat
......................w/Driver Backrest

$689

Enlarge Vintage Seat on Bike
Mounting Suggestions

C. Contoured Sissy Bar Pads

For a complete selection of Sissy Bar Pads and Contoured Sissy Bar Pads Click Here.

D. Tank & Fender Bibs

Tank Bibs
Handmade in New England, Mustang Tank Bibs are available plain or with studs and a concho. Contoured to hug the tank and felt-backed to protect the paint, these bibs utilize stock mounts for easy installation. The edges are finished with braid. Decorative studs are plated brass, not steel, and will never rust. Conchos are custom, heavy die cast zinc, not a thin stamping, and are hand-tied with genuine leather straps.

Enlarge Plain Tank Bib
Part #93195- Plain Tank Bib


Part #93196- Studded Tank Bib

93195 - Plain Tank Bib

$49

 

 

 

93196 - Studded Tank Bib

$59

Enlarge Studded Tank Bib
   
Fender Bibs
Handmade at the Mustang seat plant in New England, Mustang Fender Bibs are designed to work with just a solo seat. They are felt-backed to protect paint and are perfect for covering existing scratches. They utilize stock fender mounts and are contoured to fit the fender mounts.
Enlarge Plain Fender Bib
Part #78070................................Part #78071

78070 - Plain Fender Bib

$30

78071 - Studded Fender Bib

$35

Enlarge Studded Fender Bib
 
COPYRIGHT© 2008 MUSTANG MOTORCYCLE PRODUCTS, INC. ALL RIGHTS RESERVED
No part of this web site may be reproduced or transmitted in any form by any means without Prior Written Permission from
Mustang Motorcycle Products, Inc.


Contact the Webmaster